MiniLFR Tutorials

Here is the tutorials for MiniLFR Robot

• 1. Introducing of Mini Line Follower Robot
  • 1.1. Introduction to MiniLFR (Mini Linefollow Robot)
  • 1.2. MiniLFR onboard resource
  • 1.3. Quick Start of line follow mode
  • 1.4. MiniLFR FAQ
• 2. Out of box object avoidance mode
  • 2.1. The Object avoidance mode
  • 2.2. Steps
• 3. Install Kittenblock
  • 3.1. The Kittenblock Graphical programming software
  • 3.2. Software Download
  • 3.3. Quick start of Kittenblock
  • 3.4. Second way to restore firmware
  • 3.5. Wifi Communication
  • 3.6. Summary
• 4. Spot Light Control
  • 4.1. The Spot Light
  • 4.2. Block For Spotlight
  • 4.3. Blinking
  • 4.4. Burn it the robot
  • 4.5. Blinking
• 5. The Hover Light
  • 5.1. Hoverlight position
  • 5.2. Hoverlight blocks
  • 5.3. Detailed bottom RGB blocks
  • 5.4. A looping color programme
  • 5.5. Offline mode
  • 5.6. The effect
• 6. Buzzer
  • 6.1. Buzzer’s position
  • 6.2. Blocks for a buzzer
  • 6.3. Buzzer test code
  • 6.4. Make a police siren
• 7. Motor Control
  • 7.1. The Motors
  • 7.2. Blocks for motors
  • 7.3. Motor rolling
• 8. Buttons
  • 8.1. The buttons of MiniLFR
  • 8.2. Block for buttons
  • 8.3. Loop reading
  • 8.4. Button as a trigger source
• 9. The Infra Sensors
  • 9.1. Hardware of Infra Sensors
  • 9.2. Block for infra sensors
  • 9.3. Read the sensor
  • 9.4. Simple line follow algorithm
• 10. Infi RGB Ring
  • 10.1. Hardware of RGB Ring
  • 10.2. Block for the RGB Ring module
  • 10.3. Controlling the pixels
• 11. Nekomimi RGB pixel
  • 11.1. The Nekomimi Module
  • 11.2. Blocks description
  • 11.3. Color by distance sensing
• 12. Nekomimi Ultrasonic Sensing
  • 12.1. Hardware
  • 12.2. The distance blocks
  • 12.3. A simple object avoidance programme
• 13. Ir Remote Control
  • 13.1. The infra transceivers
  • 13.2. Ir transceiver blocks
  • 13.3. Spotlight response to ir remote controller
• 14. The matrix display
  • 14.1. The matrix display module
  • 14.2. The block for the matrix display
  • 14.3. Animation Loop